Instructions / Assembly

8
Keyhole Installation (continued)
7
Attaching the fixture
□ Hide the wires in the junction box and guide the heads of the four wood screws (CC) into the keyhole
slots.
□ Slide the xture (A) so that the wood screw heads (CC) rest over the narrow part of the keyhole slot.
□ Ensure that the xture (A) is supported and tighten the four wood screws (CC) until the xture is secured
to the mounting surface.
CC
8
Attaching the lens
□ Carefully slide the end of the lens (B) into the xed endcap on the xture base (A).
□ While holding the lens, (B) rotate the hinged endcap (C) outward and ensure the full length of the lens is
now at against the xture base (A).
□ Carefully allow the hinged endcap (C) to rotate inward until it is resting against the lens (B).
A
C
B
IMPORTANT: Hinged endcap (C) is spring loaded. To
avoid possible damage, do not allow hinged endcap (C)
to snap back against the lens.