Instructions / Assembly
6
6
Prepare the xture for installation.
Remove the cover bracket (B) which pre-installed on the back of xture (A).
Using a screwdriver punch out the knock out in the cover bracket (B) for wiring.
Feed the electrical wires from the xture through the cover bracket (B).
Use the previous-removed screw (C) to re-attach the cover bracket (B) to the xture (A).
7
Surface Mounting (continued)
□
□
□
□
Make the electrical connections.
Connect the electrical wires from the power supply to the LED strip xture wires.
Remove the wire nuts attached on the three supply wires from the LED strip xture.
Connect the three supply wires (black-hot, white-neutral,and green-ground) from LED
strip xture to the same color wires from the electrical power supply through knockout
with the wire nuts (FF).
□
□
□
C
D
B
A
A
FF
FF
Wrap electrical wire (supplied by others) around xture to tether and hang the xture from junction box or brackets to help temporality
NOTE:
support the xture, while making electrical connections with wire nuts.