Owner Manual

Page 13
OPERATION INSTRUCTIONS
SIGNALS DURING OVEN
SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept
the entry, check and try again.
SETTING THE CLOCK
1. Touch CLOCK pad.
2. Use the number pads to enter the
correct time.
3. Touch CLOCK pad again.
NOTE: · This is a 12-hour cycle clock.
When the oven is rst plugged
in or when power resumes after
a power interruption, the display
will show ENTER CLOCK TIME. If
you prefer not to have the clock
displayed, touch RESET.
SETTING THE OVEN TIMER
1. Touch TIMER.
2. Enter the amount of time by touching
the number pads.
3. Touch START/STOP.
NOTE: · The maximum time you can
enter is 99 minutes and 99
seconds.
· Time countdown can be seen in
display before clock or cooking
time returns to display.
· Touch TIMER and then touch
RESET to cancel TIMER during
timing process.
SETTING A COOKING
PROGRAM
A. One-stage Cooking
1. Use the number pads to set a cooking
time. You can set a cooking time from
one second to 99 minutes and 99
seconds.
2. If you want to set a power level other
than 100% power, touch POWER, and
then use the number pads to enter the
power level.
3. Touch START/STOP to start cooking.
Use the digits to set a cooking power
level:
SET UP & USE
PRESS POWER
LEVEL PAD
POWER
1,0 100%
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
0 0%