User guide

1541 Ultimate User Manual http://www.1541ultimate.net/
14
The Configuration menu
When you press the middle button of the board, it will get you into the SD Card browser.
From there press the F2 key to get into the Configuration menu.
In the Configuration menu you will find a whole lot of options that affect the operation of
the 1541 Ultimate. Note, this screenshot has been taken from an 1541 Ultimate running
firmware 1.5, so older/newer firmware releases may have less or different options. Most
options are selectable to Yes/No or Enabled/Disabled.
Be advised: even when an option is Enabled, it might actually be inoperative. Gideon has
fail-safes implemented for settings that are not compatible with original hardware
combinations.
Owner Your name
Application to boot If a bootstrap-program is found in the ROOT of the SD Card
with the specified name it will be loaded and executed by the
1541 Ultimate at power-on. This option is mainly used for
Flashing the 1541 Ultimate. It is NOT meant to load regular
Commodore software!