User guide

1541 Ultimate User Manual http://www.1541ultimate.net/
17
Startup in menu When set to Yes, the 1541 Ultimate will power-up into it’s
freeze menu.
Default: No
Ethernet interface When set to Enabled this will turn on Ethernet support for
your 1541 Ultimate. This option is only visible if you have a
1541 Ultimate with Ethernet support.
Default: Disabled (Advise: Leave disabled when NET is not
needed)
The Ethernet support is not supported, even when set to Enabled, when the Final III
Cartridge is selected, as it is not compatible to it.
The Ethernet support is not supported, even when set to Enabled, when the Action Replay
4.5 or Action Replay 6.0 Cartridge is selected, as it is not designed to.
Some of the above mentioned options do not require a save and power cycle to be
activated. For example changing the drive id’s will work immediately without saving and
power cycling. You should assume that changing the real hardware based selections
require a power cycle for now.
Be advised, when you configure software to use a REU, but you have the REU support
disabled in the Configuration menu, it will lead to corruption of data. I noticed this when
using Renegade (=Maverick) copier. This is not a flaw of the 1541 Ultimate, since the
software will be reading garbage (from some part of ROM) instead of emulated RAM.