User manual

Appendix C: Glossary
44
CommPact User Manual
and talk to an operator via the Control System.
SMS Command An SMS message sent to the Control System that causes the
system to perform a specific function.
SMS
Confirmation
An SMS message sent to the user confirming that the SMS
command has been performed.
System Status
LEDs
Luminous indicators on the front panel that provide information
on the arm and power status of the system.
T
Telecontrol A feature that provides remote access via the telephone including
remote arming/disarming, siren cancel and Two-Way audio.
Tones Chimes sounded by the Control System’s internal or external
siren.
Trouble Tones Tones sounded by the system to indicate a trouble condition.
TWA
Two-Way Audio (abbr.)
TX Transmitter (abbr.)
TX List
A service feature that lists all the system’s registered
transmitters, their last recorded status and signal strength.
TX Test
A service feature that displays the source of the last received
transmission.
U
Unbypass
The restore of original state to a bypassed zone.
User Code
A four-digit code that grants access to certain system functions
such as arming and disarming the system.
W
Walk Test A mode that enables detectors to be tested without generating an
alarm.
WUAPP Web User Application Interface (abbr.) Web Application allowing
full interface to the system's user functions.
WAP A protocol used to enable access to the mobile Web via mobile
phone or PDA.
Web Remote
Programmer
Software that enable installers or service providers to operate and
program the system from a PC either on-site or from a remote
location.
Z
Zone
A protected area within the security system.
Zone Bypassing See Bypassed Zone