User Manual

Chapter 7 Installing modules
122 Release 2.0, 910056 Rev01d
Installing a 1xDOM
This procedure explains how to install a 1xDOM module.
Be sure you have read and understood Understanding the module installation process
on page 104 before
continuing.
Requirements
•ESD wrist strap
Slotted screwdriver
Procedure
1. Identify the slot in which you will install the 1xDOM module.
The primary 1xDOM installs in slot 4. The redundant 1xDOM installs in slot 8.
See Understanding module slot numbering
on page 11 for more information.
WRIST
STRAP
Wear an ESD strap and plug it into the ESD jack in the AIU when
handling modules or equipment damage can occur. See Figure 9
on page 18.
CAUTION
Ensure that you install the 1xDOM module into the proper slot
(either slot 4 or slot 8). Installing a 1xDOM module into a slot
reserved for a different module type can cause equipment
damage.