User Manual

Chapter 7 ● Installing modules
106 Release 2.0, 910056 Rev01d
Procedure
1. Locate the slot into which you will install the PA module.
The PA installs in the top part of slots 1, 5, and 9.
See Understanding module slot numbering
on page 11 for more information.
2. Align the PA with the module guides in the top and bottom of the slot of the appropriate sector.
3. Use the module handle to push the PA through the module guides and into the slot until you feel it touch
the backplane.
NOTE
PA modules and RM modules pairs are installed in the top and
bottom of the same vertical module slot.
Top module guide
Bottom module guide