User Manual

Chapter 12 ● Running the commissioning script
148 Release 2.0, 910056 Rev01d
3. Examine the output from the ls command. If there is no config directory, create the config
directory by entering the following:
AIRVANA-03(shell)(disk0:/)>mkdir config
4. Move to the config directory by entering the following:
AIRVANA-03(shell)(disk0:/)>cd config
The following displays:
AIRVANA-03(shell)(disk0:config)>
5. Prepare the node to use kermit to receive the file by entering the following:
AIRVANA-03(shell)(disk0:config)>kermit receive <filename>
Where <filename> is the name you want the script file to have after it is received on the node
through kermit. This is not necessarily the same file name that the script file has on the laptop.
The CLI is now locked waiting to receive a file. Now you must prepare the laptop and transmit the
script file using kermit.
This procedure is complete. Go to Transmitting a script from a laptop to the network element
on page 148.
Transmitting a script from a laptop to the network element
This procedure explains how to transmit a script file from the laptop to a node that is already initialized to
receive the file using kermit over the serial connection using kermit.
1. Launch HyperTerminal.
On the laptop on, click Windows Start
⇒Programs ⇒ Accessories ⇒ Communications ⇒
HyperTerminal.
NOTE
The click sequence to launch Hyperterminal is different on
different versions of Windows.