User Manual

Transmitting a script from a laptop to the network element
IP-RN 8000 Installation & Commissioning Guide 151
4. Click OK and the following COM1 properties window displays:
a. In the Bits per second pull down selection list, select 38400.
b. Ensure the Data bits selection is 8.
c. Ensure the Parity selection is None.
d. Ensure the Stop bits selection is 1.
e. In the Flow control pull down selection list, select None.
f. Click OK to close the COM Properties window.
5. Open the Send File window.
Select Transfer
⇒ Send File...