User Manual

Chapter 14 ● Calibrating transmit power
186 Release 2.0, 910056 Rev01d
3. If sector 3 (gamma) is deployed on the node, set the power transmission level to the figure specified by
network planners and blossom the transmission as follows:
AIRVANA-03>enable
AIRVANA-03#configure
AIRVANA-03(config)#sector-element element1/4/3
AIRVANA-03(config-element)#tx-power <specified by network planners>
AIRVANA-03(config-element)#no shutdown
AIRVANA-03(config-element)#exit
AIRVANA-03(config)#exit
AIRVANA-03#exit
AIRVANA-03>
4. Verify all sectors are operational as follows.
AIRVANA-03>show sector-element
Name Carrier Sector CAI Channel Power Admin Oper
--------------------------------------------------------------------
element1/4/1 carrier1 sector1 IS-856 850 XX dBm UP UP
element1/4/2 carrier1 sector2 IS-856 850 XX dBm UP UP
element1/4/3 carrier1 sector3 IS-856 850 XX dBm UP UP
The sector you blossomed should have an Admin of UP and an Oper of UP
The Power is as you configured it for each sector.
This procedure is complete. Go to Chapter 15,
Completing commissioning.