User Manual

Wiring backhaul to the backhaul punch block
IP-RN 8000 Installation & Commissioning Guide 81
3. Find the correct punch down terminal positions on the punch block by counting from the left or by using
the color of the Airvana pre-installed wire.
Airvana uses AT&T punch block wire color coding.
black wire/slate stripe Not used 29
slate wire/black stripe 30
yellow wire/blue stripe Not used 31
blue wire/yellow stripe 32
yellow wire/orange stripe Not used 33
orange wire/yellow stripe 34
yellow wire/green stripe Not used 35
green wire/yellow stripe 36
yellow wire/brown stripe Not used 37
brown wire/yellow stripe 38
yellow wire/slate stripe Not used 39
slate wire/yellow stripe 40
violet wire/blue stripe Primary Ethernet backhaul. Transmit. Positive (tip) 41
blue wire/violet stripe Primary Ethernet backhaul. Transmit. Negative (ring) 42
violet wire/orange stripe Primary Ethernet backhaul. Receive. Positive (tip) 43
orange wire/violet stripe Primary Ethernet backhaul. Receive. Negative (ring) 44
violet wire/green stripe Redundant Ethernet backhaul. Transmit. Positive (tip) 45
green wire/violet stripe Redundant Ethernet backhaul. Transmit. Negative (ring) 46
violet wire/brown stripe Redundant Ethernet backhaul. Receive. Positive (tip) 47
brown wire/violet stripe Redundant Ethernet backhaul. Receive. Negative (ring) 48
violet wire/slate stripe Not used 49
slate wire/violet stripe 50
Table 19
Backhaul punch block pin-out (continued)
Airvana wire color
code (pre-wired into
the punch block)
Backhaul wire signal description
Punch
down
position