User Manual

Chapter 1 ● Introducing the IP-Radio Node 8000
36 Release 2.0, 910056 Rev01d
Understanding the tech-on-site switch
The tech-on-site switch is a security feature that enables detection of unauthorized entry into the cabinet
through the door. The switch is located at the lower left of the front side of the cabinet and is only visible
when the door is open. See Figure 2
.
The state of the switch is determined by the position of the main shaft. See Figure 18
. The main shaft has
three positions:
• Normal — The shaft is spring loaded to take this position when the door opens causing the Tech-on-site
LED to light green.
In this position, opening the door triggers a Door/intrusion alarm. The Door/intrusion LED lights red
and the alarm is reported through software to the AirVista management system.
• Pulled forward— Technicians must pull the shaft of the switch forward to set the switch to this position,
which lights the Tech-on-site LED red and suppresses Door/intrusion alarms.
This position indicates an authorized technician has the door open. The Tech-on-site alarm LED lights
red and the Door/intrusion
alarm is disabled and its LED lights green.
Figure 18 The tech-on-site switch
NOTE
Whenever an authorized technician opens the door, they must
pull the shaft of the switch forward into the tech-on-site position
to disable the Door/intrusion alarm. See Opening the door
on
page 198
Main shaft