User Manual

Unpacking the cabinet from its shipping container
IP-RN 8000 Installation & Commissioning Guide 55
4. Using the same procedure, carefully remove the snaps holding the shipping crate’s wooden sides in
place.
5. Remove the plastic bag covering the cabinet.
6. Remove any boxes that may have been tucked beneath the cabinet front door.
A cardboard template is tucked in the crate that can be used to locate the anchor bolts you embed in the
concrete pad when the pad is poured.
This procedure is complete. Go to Removing access panels
on page 56
CAUTION
As you remove the snaps, the wooden sides will fall off. Hold the
sides in place as you remove the snaps.