User Manual
Table Of Contents
- Contents
- List of figures
- List of tables
- About this document
- ipBTS system overview
- Planning
- ipBTS C30 installation
- RN commissioning
- Requirements
- CLI connection
- Establishing a console connection
- Connecting the laptop to the ipBTS C30
- Downloading and activating new software
- Verifying SNTP time
- Commissioning the ipBTS C30
- Performing Loopback tests
- The loopback test process
- Backhaul loopback testing
- Ethernet loopbacks
- Looping back Ethernet backhaul links
- Looping back at the Ethernet port
- Entering diagnostic mode and configuring test parameters
- Performing external loopback tests on backhaul links
- Troubleshooting failed backhaul links
- Removing physical loopbacks
- Configuring IP on the Ethernet port and laptop
- Establishing the CLI/SSH/Ethernet connection
- Updating node software
- RN hardware components
- RN Specifications
- Hot-swapping ipBTS hardware
- Index
About this document
Conventions
Airvana ipBTS C30 Installation and Commissioning, Release 4.0 4
Conventions
This guide uses the following text conventions, as applicable.
Table 2. Conventions
Convention Description
Syntax symbols
< > Enclose a required parameter or set of parameters. For example:
>band-class <class>
<class> is a required parameter.
< > Enclose a named keyboard key. For example:
Press <ENTER> to continue.
You must press the Enter key to continue.
[ ] Enclose an optional parameter or set of parameters. For example:
>activate image <version> [reboot]
[reboot] is an optional parameter.
| Separates items on a list of parameters, only one of which can be
used. For example:
>channel-included <yes|no>
A valid command is:
>channel-included yes
Font usage
Bold CLI input font Indicates text that must be entered exactly as shown. For example:
Enter ping 192.23.10.12.
Italic CLI input font Indicates a variable parameter for which you must provide an
actual value. For example:
>authentication key <aukey>
<aukey> is a variable parameter.
A valid command is:
>authentication key 9782503000
Plain CLI output font Indicates system output in a command line or system-generated
file. For example:
IP address 192.23.10.12 is alive.
Italic CLI output font Indicates a variable in system output in a command line or
system-generated file. For example:
Installation of release <release> is
complete.