User Manual
Table Of Contents
- Contents
- List of figures
- List of tables
- About this document
- ipBTS system overview
- Planning
- ipBTS C30 installation
- RN commissioning
- Requirements
- CLI connection
- Establishing a console connection
- Connecting the laptop to the ipBTS C30
- Downloading and activating new software
- Verifying SNTP time
- Commissioning the ipBTS C30
- Performing Loopback tests
- The loopback test process
- Backhaul loopback testing
- Ethernet loopbacks
- Looping back Ethernet backhaul links
- Looping back at the Ethernet port
- Entering diagnostic mode and configuring test parameters
- Performing external loopback tests on backhaul links
- Troubleshooting failed backhaul links
- Removing physical loopbacks
- Configuring IP on the Ethernet port and laptop
- Establishing the CLI/SSH/Ethernet connection
- Updating node software
- RN hardware components
- RN Specifications
- Hot-swapping ipBTS hardware
- Index
Chapter 2 l Planning
Requirements
Airvana ipBTS C30 Installation and Commissioning, Release 4.0 2-3
Table 2-4. ipBTS altitude specification
Specification Value
Altitude Normal conditions: 1,800 m. (below 5,900 ft.). Operating
temperature ranges will be derrated above 1,800 m. At
altitudes between 6,000 feet (1,829 m) and 12,000 feet
(3,658 m), the specified upper limit for operational
temperature (+40 degrees C) is reduced by 2 degrees C every
1,000 feet.