Specifications

Appendix D Field Replaceable Units
OneCell
®
Hardware Installation, Release 4.5 D-11
D
R
A
F
T
8 Power on the controller.
9 Configure the BC. Follow configuration procedures starting with Accessing the
Web GUI on page 8-19.
Post-Install Verification
On-site
The operational state of the OneCell system can be determined by the LED status on
the BC’s front panel. Additional information can be attained from the WebGUI status
screens.
Start the verification with Verify the OneCell system installation on page 9-2 and
continue through the end of the chapter.
Off-site
1 Open a supported Web browser.
NOTE: The DMS GUI supports Internet Explorer versions 9, 10 and 11 and
Chrome version 36 Web browsers, and a screen resolution of 1024 x 768 and
higher.