Users Manual Part 2

Appendix D Field Replaceable Units
ONECELL
®
Hardware Installation, Release 5.5 D-11
D
R
A
F
T
8 Power on the controller.
9 Configure the BC.
Post-Install Verification
On-site
The operational state of the ONECELL system can be determined by the LED status
on the BC’s front panel. Additional information can be attained from the WebGUI
status screens.
Off-site
1 Open a supported Web browser.
NOTE: The DMS GUI supports Microsoft Edge 81 and later, Google Chrome 81
and later, and Mozilla Firefox Quantum 68 and later.
2 Enter the IP address for the Device Management portal.
http://<IP Address DMS server>/deviceconsole
The Sign In dialog box displays.