Users Manual Part 2

Appendix D Field Replaceable Units
D-14 M0304AC 5.5.01 July 2021
D
R
A
F
T
On-site activities
Before replacing the RP, delete the RP from the system using the WebGUI.
1 Connect the Ethernet cable to the MGMT port on the BC’s front panel.
2 Open a supported browser.
3 Enter the IP address for the GUI, using the format below.
https://<IP address of Management Interface>:6002
Example:
https://192.168.8.1:6002
The Sign In dialog box appears.
Laptop for Web GUI access
Ethernet cable
Note: Required for connecting the laptop to the
ONECELL Baseband Controller Management port
Prerequisite