Users Manual Part 1

Chapter 6 RP2000 Installation
ONECELL
®
Hardware Installation, Release 5.5 6-23
D
R
A
F
T
Pole mount
The Radio Point can be pole mounted. This configuration is used for building where
there are no drop ceilings.
Mounting the Radio Point (RP) on a pole requires the following hardware provided by
CommScope in the mounting kit:
• Mounting bracket
• 4 screws
Figure 6-4. Mounting bracket kit contents
Mounting the Radio Point (RP) on a pole requires the following hardware provided by
the system integrator:
• Adjustable clamp at least 2 inches larger than the circumference of the pole
Pole mount installation
1 Attach the bracket to the Radio point.
Mounting bracket