Users Manual Part 1

Chapter 1 CommScope ONECELL® overview

ONECELL

Hardware Installation, Release 5.5 1-3

Figure 1-1. ONECELL solution

ONECELL hardware components

The ONECELL hardware consists of the following components:

• Baseband Controller

— Baseband Controller Chassis

— Baseband Controller Module

— Power/Fan Unit (PFU)

Baseband Controller physical ports

The following ports are on the front panel of the Baseband Controller Module.

Table 1-1 shows the port assignments. In addition, there is a connector used for the

GPS antenna cable.

NOTE

For more detailed BC port information, see ONECELL

Network Planning Guide,

v5.5 (M0304AF).