Users Manual Part 1

Chapter 1 CommScope ONECELL® overview
1-4 M0304AC 5.5.01 July 2021
D
R
A
F
T
Table 1-1. Baseband Controller physical port assignments
Port
Assignment
Network Port Speed Media Type Description
MGMT Local
Management
1 Gbps RJ45 External Interface to access the WebGUI on the
Baseband Controller.
0 Not used 1 Gbps RJ45 Not used
1-6 IQ Data 1 Gbps RJ45 Fronthaul IQ Data Traffic between the Baseband
Controller and Radio Points via an Ethernet switch
on copper (RJ45) port.
7 Boundary
Clock
1 Gbps Dual Media
RJ45 or SFP
Boundary Clock Input of IEEE 1588 PTP Timing
signal via dual media port.
8 IPsec 1 Gbps Dual Media
RJ45 or SFP
Backhaul Traffic (S1 and OAM Interfaces) via dual
media port. VLAN tags are configurable in Dual
IPsec mode to separate different traffic streams on
the same port.
9 X2 and
Redundancy
1 Gbps Dual Media
RJ45 or SFP
Fronthaul Traffic for X2 and Redundancy Cluster
data via dual media port.
10 RP
Management
and Timing
1 Gbps Dual Media
RJ45 or SFP
Fronthaul Traffic for IEEE 1588 PTP timing and
SOAP/XML control data via dual media port.
Timing and OAM data traffic between Baseband
Controller and Radio Points through an Ethernet
switch(s)
11 IQ Data 10 Gbps SFP+ Fronthaul IQ Data Traffic between the Baseband
Controller and Radio Points via Ethernet switch on
Fiber (SFP) port.
12 Not used 10 Gbps SFP+ Not used