Users Manual Part 1

Chapter 5 RP5100r installation
ONECELL
®
Hardware Installation, Release 5.5 5-4
D
R
A
F
T
Figure 5-3. RJ45, IP67 connector assembly
Antenna port label
In a multi operator deployment, each operator can connect their own antenna for the
Bands and slots they intend to use. This feature allows an operator to reserve the
Band/Radio module slot on an outdoor RP5100r to be used for or by a Baseband
Controller when outdoor RP5100s are deployed in an enterprise with multiple
Baseband Controllers (up to 4).
The antenna port label shows the antenna ports, internal slot number and supported
band. These parameters are configured at the factory.
Figure 5-4. Antenna port label
Pole mount installation
There is vertical orientation for pole mount installations
NOTE
The minimum pole diameter requirement is 4'' (102mm).