Users Manual Part 2
Appendix B Installation troubleshooting
B-6 M0304AC 5.5.01 July 2021
D
R
A
F
T
RP5100r LED patterns
The Radio Point RP5100r has one LED. The following table includes the LED
patterns.
LED
Display Pattern Indicates Action to Take
Green, blinking • Not all available radio modules are in use
• RFTx ON for all radio modules
No action required
Green, solid • All available radio modules are in use
• RFTx ON for all radio modules
No action required
Red, solid Error in the system.
• No module connected to the BC
• All modules have low power
Replace Radio Point
Red, blinking No modules in use
Note: The radio modules may be
connected to the BC.
• Check the connection between the RP and BC.
• Check that the BC admin status is UP.
Green, fast blinking Software upgrade No action required