Users Manual Part 2

Appendix D Field Replaceable Units
D-52 M0304AC 5.5.01 July 2021
D
R
A
F
T
8 Attach the RP cover.
9 Verify the RF module installation. The operational state of the RF module can be
determined by the LED status on the RP. Additional information can be attained
from the WebGUI status screens.
For verification procedures, see RP post-replacement verification.
Replacing RP2000 series Radio Points
This procedure provides instructions for replacing a ONECELL RP2000 series Radio
Point in a live network environment.
Replacing a ceiling Indoor RP (above tile)
1 Remove the ceiling tile below the mounted RP to allow access to the mounting
hardware and Ethernet cable.