Users Manual Part 1

CommScope Era
™
CAP M 4/70/80 M0201AYA_uc
Page 8 © October 2019 CommScope, Inc.
CAP M Overview
Notch-Filter Connectors
The CAP M 4/70/80 has two pairs of Notch-Filter connectors that can be used to insert notch filters. The
QMA-F connectors, which are closed by jumpers, have a protective cover. Donotremovetheprotective
coverorinterferewiththejumperunlessnotchfiltersarerequired.
Figure 3. Notch-Filter Connector on the CAP M 4/70/80
CAP M Hardware Options
The following sections describe hardware options for the CAP M.
Single Mounting Bracket
The Single Mounting Bracket (CommScope PN 7821955-xx) provides the mounting brackets required to
mount an CAP M to a wall or other vertical, flat surface. See "Mount a CAP M Using a Single Mounting Bracket”
on page 28.