Users Manual Part 1

M0201AYA_uc CommScope Era
™
CAP M 4/70/80
© October 2019 CommScope, Inc. Page 25
Installing CAP Ms
16 Close all unused grooves with the plastic cylinders, no matter if one or
two cable glands are used.
17 Insert the copper wires in the first multiple terminal connectors. See
markings on the internal support. Then fasten the copper cables inside
the box using one cable tie.
18 Remove the sealing nut and insert the CAP M supply cable and tighten the
sealing nut.
19 Connect the supply cable to the terminal strip and fix it inside the box
using one cable tie.
In the instance when two CAP Ms are in a dual mount or a cascade, it is
possible to connect a second power supply cable. In the figure to the
right, 1 and 2 refers to two CAP Ms.
1
2