Users Manual Part 1
M0201AYA_uc CommScope Era
™
CAP M 4/70/80
© October 2019 CommScope, Inc. Page 29
Installing CAP Ms
6 Secure the Mounting Bracket to the wall (or another suitable vertical surface) as shown below.
a Install the mounting bracket using 4 M6 screw anchors (not included) or
suitable lag bolts according
to the drilling layout.
The M6 screw anchors do not ship with the CAP M as the anchor type is dependent on the on-site
conditions (wall structure and materials). Use screw anchors that are rated for the mounting surface.
b C
onfirm that the Mounting Bracket is securely fastened to the wall.
Single Mounng Bracket
1
2
3
4
1
through
4
are the four screw anchors