Users Manual Part 1

M0201AYA_uc CommScope Era

™

CAP M 4/70/80

Installing CAP Ms

11 On lower right of the CAP M, reinstall the M6x12 screw and its washers that you removed in Step 7 on

page 30.

a Slide first the M6

plain washer and then the M6 split-lock washer over the M6x12 screw.

b Insert the

M6x12 screw through the screw hole shown below, and screw it back into the CAP M

chassis; torque to 11 N-m.

M6x12 screw

and

washer set

12 Repeat Step 11 on the left side of the CAP M.

13 D

o one of the following:

• If t

his installation requires a Hybrid Fiber Splice Box, go to "Attach a Hybrid Fiber Splice Box to the

CAP M” on page 45.

• If th

is installation does not a Hybrid Fiber Splice Box, go to "Grounding the CAP M” on page 49.