Users Manual Part 1

M0201AYA_uc CommScope Era

™

CAP M 4/70/80

Installing CAP Ms

Attach a Hybrid Fiber Splice Box to the CAP M

The steps in this section pertain only to those installations that require the use of the optional Hybrid

Fiber Splice Box to provide fiber and power to the CAP M. If the optional Hybrid Fiber Splice Box is not

required for this installation,

skip to "Grounding the CAP M” on page 49.

Follow the procedure that is appropriate for this installation:

• "Attaching a Hybrid Fiber Splice Box for a

Single Mount Installation” on page 45

• "Attaching a Hybrid Fiber Splice Box f

or a Dual Mount Installation” on page 47.

Attaching a Hybrid Fiber Splice Box for a Single Mount Installation

1 Hang the Splice Box onto the Single Mounting Bracket on the right-hand side of the CAP M, as shown

below.