Users Manual Part 1

CommScope Era
™
CAP M 4/70/80 M0201AYA_uc
Page 46 © October 2019 CommScope, Inc.
Installing CAP Ms
2 Remove the six neck screws (shown below) from the front cover of the Splice Box.
3 Open the Splice Box.
4 At
tach an M4 x 25 pan-head screw to the upper hole, and a second M4 x 25 pan-head to the hole on the
lower, right-hand side of the Splice Box.
5 Close the Splice Box.
6 Rep
lace the six neck screws that you removed from the front cover of the Splice Box in Step 2 on page 46.
7 Go to "Grounding the CAP M” on page 49.