Installation Guide
Table Of Contents
- Table of Contents
- Document Overview
- Era System Overview
- CAP M Overview
- Safely Working with Era Hardware
- Installing CAP Ms
- CAP M Installation and Cascade Rules
- Cat6A Cable Requirements for Ethernet Devices
- Prepare for Installation
- Wire an Optional Hybrid Fiber Splice Box
- Mount the CAP M
- Grounding the CAP M
- Connect the CAP M Cables
- Power the CAP M
- Contacting CommScope
- CMS Global Technical Support
- Waste Electrical and Electronic Equipment Recycling
- Hardware to Software Mapping Information
- CMS Technical Training
- Accessing Era User Documentation
CommScope Era
™
Medium Power Carrier Access Point Installation Guide M0201AJE_uc
Page 26 © February 2020 CommScope, Inc.
Installing CAP Ms
17 Insert the copper wires in the first multiple terminal connectors. See
markings on the internal support. Then fasten the copper cables inside
the box using one cable tie.
18 Remove the sealing nut and insert the CAP M supply cable and tighten the
sealing nut.
19 Connect the supply cable to the terminal strip and fix it inside the box
using one cable tie.
In the instance when two CAP Ms are in a dual mount or a cascade, it is
possible to connect a second power supply cable. In the figure to the
right, 1 and 2 refers to two CAP Ms.
1
2