Installation Guide
Table Of Contents
- Table of Contents
- Document Overview
- Era System Overview
- CAP M Overview
- Safely Working with Era Hardware
- Installing CAP Ms
- CAP M Installation and Cascade Rules
- Cat6A Cable Requirements for Ethernet Devices
- Prepare for Installation
- Wire an Optional Hybrid Fiber Splice Box
- Mount the CAP M
- Grounding the CAP M
- Connect the CAP M Cables
- Power the CAP M
- Contacting CommScope
- CMS Global Technical Support
- Waste Electrical and Electronic Equipment Recycling
- Hardware to Software Mapping Information
- CMS Technical Training
- Accessing Era User Documentation
M0201AJE_uc CommScope Era
™
Medium Power Carrier Access Point Installation Guide
© February 2020 CommScope, Inc. Page 1
DOCUMENT OVERVIEW
This installation guide provides a product overview of and installation instructions for the Medium Power
Carrier Access Point (CAP M), which allows transmission between CommScope Era
™
equipment, antennas,
and Ethernet devices (such as WiFi and IP cameras).
Table 1 lists the CAP M models that this installation guide supports.
Table 1. Supported CAP M Models
Part Number
1
Model Name
7781125-000x CAP M 9/18/21/26
7820478-000x CAP M 7E/80-85/17E/19
7820689-000x CAP M 23/23/25/25
7835269-000x CAP M 6/6/7E/7E
1 The “-000x” suffix provides information as to whether the CA P M is AC or DC.
Contact your
local sales representative for further information. See also
"CommScope Part Numbers” on page 3.
For information on other Era system components, refer to the Era software and hardware user
documentation, which can be accessed on the CommScope DCCS Customer Portal (see "Accessing Era
User Documentation” on page 63
.)
For information on how to find the minimum software requirements for Era hardware, refer to
"Hardware to Software Mapping Information” on page 62.
Document Revision History
This is the fifth release of the CommScopeEra
™
MediumPowerCarrierAccessPointInstallationGuide. This
release adds the CAP M 6/6/7E/7E AP variant.