Specification Sheet


Dimensions, Coaxial
Diameter Over Jacket
7.544 mm|0.297 in
Diameter Over Jacket Tolerance
±0.008 in
Jacket Thickness
0.813 mm|0.032 in
Jacket Thickness, minimum spot
0.610 mm|0.024 in

Dimensions, Twisted Pair
Diameter Over Conductor
0.023 in per 1 strand
Diameter Over Dielectric
0.9957 mm|0.0392 in
Diameter Over Dielectric Tolerance
±0.003 in
Diameter Over Jacket
6.350 mm|0.250 in
Jacket Thickness
0.635 mm|0.025 in
Jacket Thickness, minimum spot
0.406 mm|0.016 in

Electrical Specifications
ANSI/TIA Category
6
Capacitance
52.5 pF/m|16.0 pF/ft
Characteristic Impedance
75 ohm
Characteristic Impedance Tolerance
±3 ohm
Conductor dc Resistance
6.50 ohms/kft
Dielectric Strength, conductor to shield
2500 Vdc
Jacket Spark Test Voltage
4000 Vac
Nominal Velocity of Propagation (NVP)
82 %
Shield dc Resistance
4.90 ohms/kft
Structural Return Loss
15 dB @ 5 –2200 MHz
Structural Return Loss Test Method
100% Swept Tested

Environmental Specifications
Environmental Space
Non - plenum
Flame Test Method
CM
Operating Temperature
- 40 °C to +75 °C ( - 40 °F to +167 °F)
Safety Standard
cETL|ETL
UL Temperature Rating
60 °C|140 °F

General Specifications
Cable Type
Hybrid
Jacket Color
Blue
4672004/10 | UH68120 BLRL QD6/CAT6 1000
page 2 of 3
September 9, 2018
©2018CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: May 19, 2017