Users Manual Part 2

Appendix D Field Replaceable Units
OneCell
®
Installation, RP5000 series, Release 4.0 D-11
DR
AFT
8 Power on the controller.
9 Configure the BC. Follow configuration procedures starting with Accessing the
Web GUI on
page 6-18.
Post-Install Verification
On-site
The operational state of the OneCell system can be determined by the LED status on
the BC’s front panel. Additional information can be attained from the WebGUI status
screens.
Start the verification with Verify the OneCell system inst
allation on page 6-2 and
continue through the en
d of the chapter.
Off-site
1 Open a supported Web browser.
NOTE: The DMS GUI supports Internet Explorer versions 9, 10 and 11 and
Chrome version 36 Web browsers, and a screen resolution of 1024 x 768 and
higher.