Users Manual Part 1

Chapter 4 RP5100i installation
4-2 M0300A2 4.0.11 January 2020
D
R
A
F
T
RP5100i installation overview
The RP5100i is the Radio Point for indoor solutions.
There are four configurations for installing the RP5100i, which are dependent on the
ceiling type.
• Ceiling mount, on tile
• Ceiling mount, above tile
•Flown mount
•Pole mount
NOTE
Once the Radio Point is installed and powered on, it may take up to 20 minutes for
the frequency to stabilize and lock.
NOTE
If the MR port is connected to a switch that does not provide IEEE802.3bt, type-4
PoE power, the SR port can be used to provide power with a PoE++ injector. For
more information, see OneCell
®
Network Planning Guide (M0300A1).