Users Manual Part 1

Chapter 4 RP5100i installation
OneCell
®
Installation, RP5000 series, Release 4.0 4-3
DR
AFT
Ceiling mount
Mounting the Radio Point (RP) above or on the ceiling tile requires the following
hardware provided by CommScope:
• Radio Point plate and screws
• 4" octagon box, 1-1/2" deep with 1/2" side cutouts
• Clamp and screw
Figure 4-1. CommScope ceiling mount kit contents
Octagon
box
Mounting plate for
octagon box with 2
screws
Mounting plate for RP
with 4 screws