Users Manual Part 1

Chapter 4 RP5100i installation
4-22 M0300A2 4.0.11 January 2020
DR
AFT
10 Replace the ceiling tile.
Flown mount
The Radio Point can be flown mounted on the end of a rod. This configuration is used
for building where there are no drop ceilings.
Mounting the Radio Point (RP) in the flown configuration requi
res the following
hardware provided by CommScope in the mounting kit:
• Radio Point plate and screws
• 4" octagon box, 1-1/2" deep with 1/2" side cutouts
NOTE: Remove the top, middle cutout.
• Clamp and screw – this hardware is not
required for the flown mount option