Users Manual Part 1

Chapter 4 RP5100i installation

OneCell

Installation, RP5000 series, Release 4.0 4-31

AFT

Pole mount

The Radio Point can be pole mounted. This configuration is used for building where

there are no drop ceilings.

Mounting the Radio Point (RP) on a pole requires the following hardware

provided by

CommScope in the mounting kit:

• Mounting bracket

• Screws

Figure 4-4. Mounting bracket kit contents

Mounting the Radio Point (RP) on a pole requires the following hardware provided by

the system integrator:

• Adjustable clamp at least 2 inches large

r than the circumference of the pole

Pole mount installation

1 Attach the

bracket to the Radio point.