Users Manual Part 2

Prerequisite
SSH password
Replacement OneCell RP module
Laptop for Web GUI access
Ethernet cable
Note: Required for connecting the laptop to the
OneCell Baseband Controller Management port
Appendix D Field Replaceable Units
D-14 M0300A2 4.0.11 January 2020
DR
AFT
On-site activities
Before replacing the RP, delete the RP
from the system using the WebGUI.
1 Connect the
Ethernet cable to the MGMT port on the BC’s front panel.
2 Open a supported browser.
3 Ente
r the IP address for the GUI, using the format below.
https://<IP address of Management Interface>:6002
Example:
https://192.168.8.1:6002
The Sign In dialog box appears.