Specifications

7900 Pager Programming Manual

Page 2 © CommtechWireless

NOTICE

laws, this manual, software and electronic circuitry may not be copied, in whole or in part without written

prior consent of Commtech Wireless.

All information provided in this document is carefully prepared and offered in good faith as a guide in the

installation, use and servicing of our products. Installers must ensure that the final installation operates

satisfactorily within the relevant regulatory requirements. Commtech Wireless accepts no responsibility for

incorrect installation. Commtech Wireless reserves the right to change products, specifications, and

installation data at any time, without notice.

Commtech Wireless makes certain limited warranties with respect to defective diskettes, documentation

and electronic circuitry. Please see the associated information contained on this page.

SOFTWARE LICENSE STATEMENT

This manual, software and electronic circuitry are protected by international copyright laws. Under the

written prior consent of Commtech Wireless, except in the normal use of the software to make an archival

copy of the software for the sole purpose of backing up the software and protecting your investment from

loss or damage.

LIMITED WARRANTY

With respect to the physical documentation and physical electronic circuitry enclosed herein, Commtech

Wireless warrants the same to be free of defects in materials and workmanship for a period of one year

from the date of purchase. In the event of notification within the warranty period of defects in material or

workmanship, Commtech Wireless will replace the defective diskettes, documentation and electronic

circuitry. The remedy for breach of this warranty shall be limited to replacement and shall not encompass

any other damages, including but not limited to loss of profit, and special, incidental, consequential, or other

similar claims.

Commtech Wireless specifically disclaims all other warranties, expressed or implied, including but not

limited to implied warranties of merchantability and fitness for a particular purpose with respect to defects

in the documentation and electronic circuitry, and the program license granted herein, in particular, and

without limiting operation of the program license with respect to any particular application, use, or purpose.

COMPLIANCE NOTICES

AUSTRALIA: Where applicable, to ensure compliance with ACA Technical Standards, this equipment is

labeled with a Telecommunications Compliance Label. For safety reasons, this equipment should only be

connected to compliant telecommunications equipment in accordance with the manufacturer’s instructions.

NORTH AMERICA: Where applicable, this equipment has been tested and found to comply with FCC Rules

and Regulations, Part 15 with the limits of a Class B digital device, designed to provide reasonable protection

against harmful interference. This equipment generates, uses and can radiate frequency energy and if not

installed and used in accordance with the instructions, may cause interference harmful to radio

communications. On the base of the equipment is a label containing an FCC Registration Number, if

applicable.