Specifications

7900 Pager Programming Manual
Page 6 © CommtechWireless
3. THE 7900 PAGER
3.1 Case Layout
The Commtech 7900 pager has four buttons on its case.
| | | |
Escape Left Right Read
Key Key Key Key
3.2 Kit Components
Each programming kit contains:
 The 7900 programming cradle with USB cable
 A CDROM disk containing the 7900 programming software
 This 7900 programming manual
3.3 Other Required Components
The following will also be required in order to program the pagers:
 At least one 7900 pager that requires programming.
 The cap codes that the pager will respond to.
 The baud rate of POCSAG data that is being transmitted.
 The frequency of the transmitter.
 A start-up message that will be observed when turning on the pager.
 An IBM compatible PC running Windows XP with a CDROM drive and a spare
USB port.
 Basic IBM PC knowledge.
 Basic understanding of POCSAG paging principles.