Installation and Operation Manual

INS_NetWave_REV– 06/10/13 PAGE
14
INSTALLATION AND OPERATION MANUAL
NETWAvE
Reset Button
The reset button is a physical button attached to the underside of the radio.
Please refer to Section "Reset Button."
Indicating LEDs
The light emitting diodes (LEDs) on the board are described in Section "Indicator LEDs".
7.0StatusTab
After login, when you click on the Status top‐level tab, you can see the second‐level tabs of
Overview, Routes, System Log, Kernel Log, and Real‐time Graphs. This is shown in Figure 2.
Overview
Figure 2: The Status Tab.
The Status » Overview page is divided into the sections Wireless Status, Associated Stations,
System, Memory, Network, and DHCP Leases.
Uptime: Displays the duration of time since the NetWave device was turned on or rebooted.
Figure 3: The Status » Overview page.