User Manual Global Enterprise Device (GED) Model: CTGED01 1
ABOUT This document contains only the instructions necessary for setting up and safe use of your GED device. Enjoy your GED and be cautious. WHAT’S IN THE BOX 1. DC+5V Adaptor *1 2. USB Cable*1 3. Rechargeable battery *1 4. Earphone *1 5.
GED AT A GLANCE 1 - Earphones Jack 8 - Volume+ Control Key 2 - Proximity sensor 9 - Volume- Control Key 3 - Front Camera 10 - Power On/Off 4 - Receiver 11 - Rear Camera 5 - Mic 12 - Flash Light 6 - USB Port 13 - Fingerprint Key Sensor 7 - Speaker 3
CHARGING THE BATTERY Connect one end of the USB cable (supplied) to the USB port of the DC+5V adaptor (supplied). Connect the other end of the USB cable to the USB port of the device. Plug the DC+5V adaptor into the wall socket (AC 180-240V). Charging will start. You can also charge the device via a USB cable connected to a computer. The device should only be connected via a USB 2.0 connector. You can charge the phone via USB cable connected to a computer as well.
INSTALLING A SIM /SD CARD 1. Turn off the mobile phone and unplug the external power supply. 2. Remove the back cover using the groove on the side of the phone. 3. Remove the battery. 4. Insert the SIM card with Gold-colored contacts facing down. 5. Insert the optional SD card (not included) with the Gold-colored contact facing down. 6. Insert the battery making sure the connectors align. 7. Replace the back cover.
MAIN ICONS ICON DESCRIPTION Indicates the strength of the network signals. Shows missed calls. A new message has been received. Indicates that an application is being downloaded. The alarm clock has been set and activated. A call is in progress. A music item is playing. Shows battery level. Access is blocked. Connected to a Wi-Fi network. Bluetooth is turned on. CALLS OPERATIONS Mute: Press to mute the voice. Hands-free: Press New call: Press End a call: Press to switch on the hands-free speaker.
CONNECTIONS DATA In the main menu, tap Settings then Network & Internet. Tap SIM cards and select a SIM card. Tap Cellular data to select a SIM for data connectivity. To turn off data connection, tap near SIM slot 1 or 2. Note: data connection requires SIM card presence in the device. WI-FI In the main menu, tap Settings then Network & Internet. Tap Wi-Fi off to turn on and search a network. To turn Wi-Fi off, tap again. To add a hidden SSID: Tap Settings then Network & Internet” then Wi-Fi.
USB COMPUTER CONNECTION Turn on the device; use the USB cable (supplied) to connect the USB Port of the mobile phone to the USB port of a computer. The icon appears automatically on the top of the screen of the mobile phone. Pull down from the top screen and touch can select the Connection type by touching “ to go into the USB connection screen. You ” to enable it.
MAIN SPECS Processor: Quad core 1.3Ghz processor Display: 5.5 inch two-point Capacitive Display Resolution: HD+ 720x1440 pixel Storage: 16 GB Ram: 2 GB Camera: Front 2.0 MP; Rear 5.0 MP/0.3MP Battery: 2500mAh Size: 147.6 x 70.9 x 10.1mm Expandable Memory: Up to 32 GB Sensor: G-sensor Fingerprint sensor: Yes Sim Slots: Dual SIM, GSM + GSM Sim Size: SIM1: Nano Wi-Fi: Wi-Fi 802.11, b/g/n Bluetooth: Bluetooth 4.
SAFETY USAGE GUIDELINES If the safety of the device has been compromised, it must be immediately withdrawn from use. Do not touch the screen of the phone with sharp objects and do not scratch the screen.
RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types CTGED01 (FCC ID: 2AUHC-CTGED01) has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the handset kept 1.0cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5cm separation distance between the user's body and the back of the handset.