Installation guide

Limit - Output Limter
OUT
_
1:XXXXXX MENU:Limit
THRESH :+20.0dBu
ATTACK :100ms
RELEASE:32x
 THRESH - Limit Threshold. Ranges from -20 to +20dBu in 0.5dB steps.
 ATTACK - Attack time. Ranges from 0.3 to 1ms in 0.1ms steps, then ranges from 1 to
100ms in 1ms steps.
 RELEASE - Release time. Can be set at 2X, 4X, 8X, 16X or 32X the attack time.
Source - Input Source
OUT
_
1:XXXXXX MENU:Source
1:On 4:Off
2:Off
3:Off
 1,2,3,4 – Input channel source for the current output channel. Can be set to enable the
input source (On) or disable it (Off). If more than one input source are enabled, they will
be added together as the source for the current output channel.
Ch-Name - Channel Name
OUT
_
1:XXXXXX MENU:Ch-Name
NAME:XXXXXX
 Refer to the Input Menus for details
6.3 System Menus
The System Menus allow the user to control and change parameters that are related to the
system behavior and general operation. It can be accessed by pressing the Sys key in the main
menu (when no Input/Output or System Menu is activated). All System Menus require the Enter
key to be pressed for the selected action.
Recall - Program Recall
The DXP4800 has a built in non-volatile memory that can store up to 30 different program
setups. A program can be recalled using this menu.
Community DXP4800 Owner’s Manual Page 11