Owner`s manual

Community Professional Loudspeakers MVP™ Series II Owner’s Manual
10
Stacking or Installing Loudspeaker Enclosures
Common sense is a good guide. If you stack speakers, be sure they are on a stable surface. If there is any
danger of the speakers being knocked over when stacked, don’t stack them! You need to get the speakers
up high enough so that the sound doesn’t “blow away” the people nearest to the speakers, but piling
speakers on top of a small pedestal table is asking for trouble.
Several models of the MVP™ Series II speakers have a 1-3/8" socket for use with tripod stands. Be sure
to position them so that no one can trip over the stand or knock over the loudspeaker.
Community MVP12, MVP15, MVP15HO and MVP215HO loudspeaker enclosures are provided with
5/16"-18 thread “T-Nuts” (captive threaded inserts) in the sides of the enclosures for hanging or
mounting. The accessory “STRAPKIT” provides three steel straps that attach to these inserts for
connecting rigging to the enclosure. The smaller models may be mounted from walls or ceilings by using
the accessory WB-1.
WARNING: For your protection, under no circumstances should any loudspeaker be mounted or
suspended in a public place unless the mounting method has been approved and certified by a registered
Professional Engineer. Do not suspend from handles.