Specifications

Community VLF Series – Operation Manual - Page 9
Recommended DSP Settings for the VLF212
High-Pass Filter: Butterworth 48 dB/Oct, 35 Hz
Low-Pass Filter: Butterworth 48 dB/Oct, 200 Hz (Varies based on the full-range system used)
Filter Type PEQ1 PEQ2 PEQ3 PEQ4 PEQ5
Frequency 38 Hz 45 Hz 62 Hz 110 Hz 200 Hz
Gain +4.5 dB +2.5 dB -3 dB +1 dB -7 dB
Slope/Q 0.20 Oct 0.19 Oct 0.5 Oct 1 Oct 0.33 Oct
Figure 7: VLF212 Frequency Response Unprocessed (Raw Data):
70
80
90
100
110
120
10 100 1,000
Frequency in Hertz
dB SPL
10 Hz Resolution, 1/8 octave
Figure 8: VLF212 Frequency Response Processed:
70
80
90
100
110
120
10 100 1,000
Frequency in Hertz
dB SPL
10 Hz Resolution, 1/8 octave
Figure 9: VLF212 DSP Response Frequency: