Specifications

Community R-Series Installation/Operation Manual for Models R.5 and R.25 — Page 28
MODEL R.25-94Z R.25-94TZ
Type
Two-way, horn loaded, full-range loudspeaker system, weather-resistant
Frequency Range
100 Hz - 16 kHz (160 Hz - 12.5 kHz +/- 3 dB) 100 Hz - 16 kHz (160 Hz – 12.5 kHz +/- 3 dB)
Maximum Input
200W RMS, 500W Program
40V RMS, 89V momentary peak
70V line: 200W, 100W, 50W, 25W taps
100V line: 200W, 100W, 50W taps
Recommended Amplifier
Power
420W - 600W RMS @ 8 ohms 70V/100V line (see above)
Sensitivity (1W/1m)
97 dB SPL
(160 Hz - 10 kHz 1/3 octave bands)
96 dB SPL
(160 Hz – 10 kHz 1/3 octave bands)
Maximum SPL
120 dB average, 127 dB peak 119 dB average on 200-watt tap
Nominal Dispersion
90° H x 40° V
Nominal Impedance
8 ohms (min 4.6 ohms @ 10.4 kHz) Depends on tap selected
Crossover Frequency
2 kHz
Components
LF: 1 x 8" (203mm) driver, Treated Carbon Ring Cone with Ferrofluid
HF: 1 x ¾" (20mm) exit ,non-metallic, compression driver, Ferrofluid-cooled
Driver Protection
DYNA-TECH
™
Recommended
High Pass Filter
100 Hz, 24 dB/octave high-pass filter
Input Connection
Approx. 12 ft / 4m 16-2 SJOW cable (white = +, black = –)
Enclosure Material
Roto-molded HDPE, light gray color
Grille
Three-layer stainless steel WeatherStop™ grille: Perforated stainless steel mesh,
open cell foam
Mounting
Five M8 threaded inserts
Accessories (Included)
Stainless steel (304) yoke bracket
Dimensions (HWD)
Weight
20 lbs (9.1 kg) 23 lbs (10.4 kg)
11.3 x 11.3 x 13.3 inches (287 x 287 x 338 mm)
R.25 SPECIFICATIONS*
R.25 Specifications
* Community strives to improve its products on a continual basis. Specifications may therefore be subject to change without notice.