Specifications

ComNav Explorer V1T and V1C Installation & Operation Introduction
Document PN 29010088 V1.1 - 16 -
Camera Feature Control
(Not available with the basic style controller Joystick)
Preset #92 is reserved to enter the OSD of the camera module allowing the user to adjust various parameters such as
Back Light Compensation, Automatic White Balance, Sharpness, Picture Effects and Shutter Speeds.
Auto Cruise
(Not available with the basic style controller Joystick)
Preset positions (up to 39) can be programmed into a tour. Once initiated, the camera will cruise through each preset
position. (Presets 1~39 are included in the tour). Preset #82 initiates Auto Cruise. There’s a 10 second dwell time
between each preset. Auto Cruise loops once the last preset in the tour is completed, starting back at preset 1.
Patterns
(Not available with the basic style controller Joystick)
Up to four patterns can be set, each controlling up to 10 preset positions. Patterns act like ‘mini-tours’. Once initiated,
the camera will move between preset positions in the pattern. Preset #84 starts pattern 1 (Preset #40 ~49), preset #85
starts pattern 2 (Preset #50~59), preset #86 starts pattern 3 (Preset #60~69), preset #87 starts pattern 4 (Preset
#70~99). There is no dwell time between each preset. The camera will sequence back down through the presets once
the last preset within the pattern is called
.
Scans (Auto, Random, Frame)
(Not available with the basic style controller Joystick)
AUTO: Camera scans through a 180° sweep, 90°left and 90°right of its current position. Preset #96 calls Auto
Scan.
RANDOM: Camera scans randomly through 360° of its current position. Preset #97 calls Random Scan.
FRAME: Camera scans through a 90° sweep, 45°left and 45°right of its current position. Preset #98 calls Frame
Scan.
Image Flip
Inverts the video image vertically (Preset #88).