Specifications

ComNav Explorer V1T and V1C Installation & Operation
SW2
SW Position 1 2 3 4
ON OFF OFF OFF User
OFF ON OFF OFF PELCO-P
ON ON OFF OFF PELCO-D
OFF OFF ON OFF Reserved
ON OFF ON OFF Reserved
Protocol
OFF ON ON OFF Reserved
SW Position 5 6 7 8
1200 ON OFF OFF -
2400 OFF ON OFF -
4800 ON ON OFF -
9600 OFF OFF ON -
19200 ON OFF ON -
Baud Rate (BPS)
Reserved OFF ON ON -
Desktop Installation - - - OFF
Image Flip
Reverse Installation - - - ON
Table 4: Baud Rate, Protocol and Camera Flip Setting
Note: Reboot the Camera after any configuration change
Operation
Low Light Camera
Note: Prior to powering up, ensure that all the cables and connectors
are properly connected and secured.
Camera Movement
1. Moving the Joystick Up/Down moves the camera head in the tilt direction, Up/Down respectively;
2. Moving the Joystick Left/Right moves the camera head in the pan direction, Left/Right respectively;
The joystick controller is geared so that the pan, tilt and zoom speed increases progressively away from
the central position. The closer the centre point, the slower the control, the further away, the faster the
control.
The camera will automatically calculate the degree of zoom and gear the control so that the pan
and tilt speed reduces.
Zoom Control
1. Zoom In – Twist the joystick head clockwise;
2. Zoom Out – Twist the joystick head counter clockwise.
Document PN 29010088 V1.1 - 23 -